bird does not speak OSPF on a GRE tunnel interface
Alexander Velkov
alvel85 at googlemail.com
Tue Jun 28 13:56:15 CEST 2016
Hi Ondrej,
> Yes, it does that. But you still have to specify which interfaces it is
> allowed to use for specific protocols. You can use wildcards (e.g.
> "eth*") instead of specific interfaces.
In quagga it is OK to specify a network only, quagga automatically detects
when the interfaces' IP address is in the configured range.
This is quite handy when having dynamic interface configurations, because
you don't need to alter the quagga config or care how the interface is
called.
> List of interfaces and its addresses/prefixes.
OK.
Thanks,
Alex
On Tue, Jun 28, 2016 at 12:19 PM, Ondrej Zajicek <santiago at crfreenet.org>
wrote:
> On Mon, Jun 27, 2016 at 03:26:41PM +0200, Alexander Velkov wrote:
> > Hi Ondrej,
> >
> > Thanks for you answer! I did exactly this and bird finally became more
> > 'chatty' :).
> > This is very nice, although I expected that bird is "sensing" the state
> of
> > the interfaces (e.g. through the device/direct protocols).
>
> Yes, it does that. But you still have to specify which interfaces it is
> allowed to use for specific protocols. You can use wildcards (e.g.
> "eth*") instead of specific interfaces.
>
> > What is "scanned" actually by the 'device' protocol ?
>
> List of interfaces and its addresses/prefixes.
>
> --
> Elen sila lumenn' omentielvo
>
> Ondrej 'Santiago' Zajicek (email: santiago at crfreenet.org)
> OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
> "To err is human -- to blame it on a computer is even more so."
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20160628/34a9c5c6/attachment.html>
More information about the Bird-users
mailing list