bird does not speak OSPF on a GRE tunnel interface
Alexander Velkov
alvel85 at googlemail.com
Mon Jun 27 14:40:24 CEST 2016
Hello,
Could you please help with an OSPF configuration.
I have configured a GRE tunnel between two peers - '172.16.0.9' and
'172.16.0.4'. I configured then a local address on the newly created tunnel
interface '172.16.1.1'. I would like to configure bird to speak on the GRE
interface.
I tried with the following configuration but I cannot see that bird is
announcing anything:
*# ifconfig*
eth0 Link encap:Ethernet HWaddr 00:D0:12:05:C6:D6
inet addr:172.16.0.4 Bcast:172.16.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12613 errors:0 dropped:1 overruns:0 frame:0
TX packets:9503 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1237627 (1.1 MiB) TX bytes:2152677 (2.0 MiB)
eth1 Link encap:Ethernet HWaddr 00:D0:12:06:C7:D7
inet addr:10.0.4.1 Bcast:10.0.4.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:294 errors:0 dropped:1 overruns:0 frame:0
TX packets:421 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:53820 (52.5 KiB) TX bytes:97344 (95.0 KiB)
*gretesttunnel* Link encap:UNSPEC HWaddr
AC-10-00-04-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:172.16.1.2 P-t-P:172.16.1.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:320 (320.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
*bird config:*
protocol kernel {
# persist; # Don't remove routes on BIRD shutdown
scan time 20; # Scan kernel routing table every 20 seconds
export all; # Default is export none
learn;
device routes;
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
#protocol direct {
# interface "*";
# export all;
#}
protocol ospf OSPF {
rfc1583compat;
export all;
import all;
area 172.16.0.0 {
networks {
*172.16.1.0/24 <http://172.16.1.0/24>;*
};
}
Thanks in advance!
Alexander Velkov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20160627/5656b5e5/attachment.html>
More information about the Bird-users
mailing list