OSPF export filter

[Anton Kiryushkin]

Hello.

I trying to use bird for export ospf route for Cisco Nexus with next config:

router id 10.34.23.1;

filter export_OSPF {
        if net = 77.71.22.23/32 then {
                ospf_metric1 = 20;
                ospf_metric2 = 20;
                print "net accepted:", net;
                accept;
        }
        if net = 77.71.22.24/32 then {
                ospf_metric1 = 10;
                ospf_metric2 = 10;
                print "net accepted:", net;
                accept;
        }
        reject;
}

protocol ospf server1 {
        export filter export_OSPF;
        #debug all;
        rfc1583compat yes;
        tick 2;
        area 0.0.0.0 {
                stub no;
                interface "bond0" {
                        dead 10;
                        neighbors {
                                10.0.16.1;
                        };
                        type pointopoint;
                        authentication none;
                };
                interface "lo*" {
                        stub yes;
                        cost 10;
                        priority 200;
                };
                interface "dummy0" {
                        stub yes;
                        cost 15;
                        priority 100;
                };
        };
}


But in birdc I didn't see any metrics. I have two server with same config
and same addresses on interfaces lo and dummy0 with different priorities.
Could you help me with export filter?

-- 
Best regards,
Anton Kiryushkin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://trubka.network.cz/pipermail/bird-users/attachments/20151203/88d2f4a9/attachment.html>