Juniper Route Server Client

[Anibe Onuche]

Thanks Mo & Matjaz

Problem was the Password setting which most of the Juniper peers 
implemented.
This was discovered after Mo Sent his configs which is similiar to mine 
except the transparent Pipe.
Noticed the Password setting did not correspond.

Thanks Once again
Psss: what is the use of the PIPE commands and how does it affect the 
quality of the my route server?

Regards
Anibe O.

On 7/11/2013 1:57 PM, Mo Shivji wrote:
> On 11 Jul 2013, at 13:20, Matjaž Straus Istenič <matjaz.straus at arnes.si> wrote:
>
>> On 11. jul. 2013, at 10:44, Anibe Onuche <a.onuche at nixp.net> wrote:
>>
>>> Hello All...
>>>
>>> Implemented Bird on my Route Server and got most of my routes working
>>>
>>> The challenges Currently faced is with Juniper Routers.
>>> All Peers using Junos are not connecting?
>>> Cisco was okay due to the no bgp enforce-first-as command
>> Juniper Junos OS has no problems with that. It does not check that the first AS in AS-PATH matches the neighbouring AS. Therefore, there is no variant of this command in Junos. Are you using Junos OS (M, MX series etc) or JunosE?
>>
>>> Is there any thing to look out for?
>>>
> It works for me on a J Series router.
>
> Just used (I'm sure your know this already) :
>
>
> JSerise
> -----------
> set protocols bgp group BIRD peer-as 65504
> set protocols bgp group BIRD neighbor 192.168.237.254 local-address 192.168.237.253
>
> BIRD
> ----------
> myas = 65504;
> table T3;
>
> protocol pipe P3 {
> table master;
> mode transparent;
> peer table T3;
>    }
> protocol bgp R3x1 {
>   local as myas;
>   neighbor 192.168.237.253 as 65503;
> 	   rs client;
> 	   route limit 15000;
> 	   table T3;
>             import all;
>             export all;
>             hold time 180;
> 			  }
>
>
> Mo
>
>
>
>


-- 
  
Anibe Onuche
Internet Exchange Point of Nigeria
Network /Communication Department

Tel:+234-809-3878-113
NOC:+234-809-3878-110
Website:www.ixp.net.ng