Touble ospf md5 authentication

[Csaba Szép]

Hello!

Of course this is only a workaround

But..... I use this command with Cisco 7200 12.2(28)SB5 software,
which is older than 12.3(21)

Another temporaly solution is to disable lls globally .


router ospf 1
router-id 10.0.0.2
no capability lls


2010/3/19 Vitaliy Kolodinsky <kolodinsky at telecom.by>:
> Dear, Csaba Szép.
>
> Вы писали 19 марта 2010 г., 19:11:51:
>
>> In my opinion, this is the same issue that i reported at 2009.10.05 in
>> this list.
>
>> Then i disabled LLS in the cisco side, and after everything works well.
>
>
>> ip ospf lls disable
>
> Using the ip ospf lls disable probably quite a good temporary solution, but the old IOS, this command is not
>
> bras7 (config-subif) # ip ospf lls disa
>                               ^
> % Invalid input detected at '^' marker.
>
> bras7 (config-subif) # do sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-JS-M), Version 12.3 (21), RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
>
>
> With pleasure I will see a patch from the author
> and with no less pleasure test the patch work.
>
> --
>
> Best regards,
> Vitaliy
> Kolodinsky
> BYVK-RIPE
> ISP Atlant Telecom
> kolodinsky at telecom.by
>
>