BGP Error: No listening socket

Владислав Гришин Vladislav.Grishin at vts24.ru
Sat Apr 10 08:38:22 CEST 2010


Hi!

I have been forced to change customisations of network interfaces on a
server with bird. After modification bird.conf I has checked up availability
of BGP neighbors. Everything is all right. ping ok. telnet <ip of bgp
neighbor> 179 - ok. After restart bird see error in/var/log/messges 

May 12 10:03:01 border-t2 bird: Reconfiguring
May 12 10:03:01 border-t2 bird: Enabling protocol bgpfiord
May 12 10:03:01 border-t2 bird: Enabling protocol bgpabonent
May 12 10:03:01 border-t2 bird: Reconfigured
May 12 10:03:01 border-t2 bird: sk_open: bind: Cannot assign requested
address
May 12 10:03:01 border-t2 bird: BGP: Unable to open listening socket
May 12 10:03:01 border-t2 bird: sk_open: bind: Cannot assign requested
address
May 12 10:03:01 border-t2 bird: BGP: Unable to open listening socket

OSPF the protocol works perfectly. BGP no.

[root at border-t2 etc]# ping 93.191.9.205
PING 93.191.9.205 (93.191.9.205) 56(84) bytes of data.
64 bytes from 93.191.9.205: icmp_seq=1 ttl=64 time=0.799 ms
64 bytes from 93.191.9.205: icmp_seq=2 ttl=64 time=0.824 ms
64 bytes from 93.191.9.205: icmp_seq=3 ttl=64 time=0.836 ms

--- 93.191.9.205 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.799/0.819/0.836/0.036 ms
[root at border-t2 etc]#

bird> show protocols myospf
name     proto    table    state  since       info
myospf   OSPF     master   up     09:37       Running
bird>
bird> show protocols bgpabonent
name     proto    table    state  since       info
bgpabonent BGP      testable down   10:02       Error: No listening socket
bird>
bird> show protocols bgpfiord
name     proto    table    state  since       info
bgpfiord BGP      master   down   10:02       Error: No listening socket
bird>

[root at border-t2 ~]# birdc
BIRD 1.2.3 ready.
bird> show interfaces
lo up (index=1)
        MultiAccess AdminUp LinkUp Loopback Ignored MTU=16436
        127.0.0.1/8 (Primary, broadcast 127.255.255.255, scope host)
eth0 DOWN (index=2)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
eth1 DOWN (index=3)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
eth2 up (index=4)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
        10.16.1.73/24 (Primary, broadcast 10.16.1.255, scope site)
eth0.20 up (index=5)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
        192.168.20.1/24 (Primary, broadcast 192.168.20.255, scope site)
eth0.701 up (index=6)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
        93.191.9.206/30 (Primary, broadcast 93.191.9.207, opposite
93.191.9.205, scope univ)     <-----FOR bgpfiord
eth1.10 up (index=8)
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
        192.168.10.1/24 (Primary, broadcast 192.168.10.255, scope site)
eth1.550 up (index=9)         <------FOR OSPF and bgpabonent
        MultiAccess Broadcast Multicast AdminUp LinkUp MTU=1500
        10.10.1.2/25 (Primary, broadcast 10.10.1.127, scope site)
sit0 DOWN (index=10)
        MultiAccess AdminUp LinkDown MTU=1480
bird>
bird> show interfaces summary
interface state address
lo        up    127.0.0.1/8
eth0      DOWN
eth1      DOWN
eth2      up    10.16.1.73/24
eth0.20   up    192.168.20.1/24
eth0.701  up    93.191.9.206/30    <--for bgpfiord
eth1.10   up    192.168.10.1/24
eth1.550  up    10.10.1.2/25    <--for bgpabonent and myospf
sit0      DOWN
bird>


I can not understand in any way that happens? What to check up?

Vladislav Grishin




More information about the Bird-users mailing list